As of 4/13/2011, LOCTITE® has DISCONTINUED this product.
Fluorescent Peach Color, High strength. The lubricity characteristics of Dri-Loc 205 emulate an uncoated fastener or fitting to provide more predictable torque/tension performance during assembly. Meets GM6175M.
Sealing and medium strength threadlocking, fast cure. Meets GM6124M, GM14657A, Chrysler MScc 76-b.
Dri-Loc is a dry-to-the-touch preapplied film for threaded fasteners. It remains inert on the fastener until assembly of the threads releases a quick curing resin. The resin fills all the voids in the threads and cures to securely lock and seal the assembly.
Locking and Sealing for Brass. During assembly of the fitting/fastener, a microencapsulated activator is released, initiating the curing process. The coating fills all the voids in the threads and cures to securely lock and seal the assembly.
Brass-loc is a low to medium strength thread locker AND sealant that will not corrode brass.
waterborne resin. The shearing forces caused by installation of the fastener to the mating part release the activator to allow curing of the resin matrix. The resulting chemical reaction rapidly bonds the surfaces, locking parts together and sealing leak paths. TECTORIUS TEC-BOND products offer consistent and predictable torque values and requires no heat or primers for curing.
Unaffected By Automotive Fluids, Fast Fixture Times, High Temperature & TorqueSensitive Formulas
TECTORIUS™ 2353 and 2510 SERIES threadlocking products are room temperature curing, microencapsulated, adhesives that can be applied to male or female threaded fasteners of virtually all sizes, configurations, compositions and finishes.
Automotive Structural Adhesive - high temperature formula (Up to 300F).
3M Fastener Adhesives are Microencapsulated, room temperature curing adhesives which enhance the anchorage of threaded fasteners. The adhesives remain dormant until the shearing action of engaging the fastener into a nut or threaded cavity breaks the capsules and allows the adhesives to cure.
Dry to the touch, micro encapsulated pre-coating system with a acrylate base. High strength locking and sealing.
Bradley Epoxies are microencapsulated adhesives. The adhesives remain dormant until the shearing action of the assembly activates the resin. Both the resin and the activator are encapsulated to speed up the locking cure time.
LOCTITE® Product DRI-SEAL® 5030 is a high viscosity, nontoxic, thixotropic, preapplied, water-based thread sealant. When dried, it becomes a resilient, tight clinging, non-curing sealant for tapered threads. The product provides excellent solvent resistance. UL approved for Propane and Natural Gas.
Dri-Seal™ 513HV (High Viscosity) is a resilient, tight clinging, non-curing sealant for tapered or straight threads. This product can be used on metal or plastic fittings. NSF approved for Potable Water.
Dri-Seal is a pre-applied, water based sealants that when dried become a resilient, tight clinging, non-curing sealant for tapered or straight threads. The products provide excellent solvent and vibration resistance. Effective for use on sealing applications where re-adjustments are required.
LOCTITE® Product Vibra-Seal 517 is a low viscosity, water-based thread sealant for
tapered or straight threads. The product provides excellent
solvent resistance and resistance to vibrational loosening. The products thread
filling ability and prevailing torque characteristics are effective
for use on sealing applications, particularly where readjustments
Vibra-Seal is a pre-applied, water based sealants that when dried become a resilient, tight clinging, non-curing sealant for tapered or straight threads. The products provide excellent solvent and vibration resistance. Effective for use on sealing applications where re-adjustments are required.
A very high quality, water washable impregnation
sealant for porous materials which has been especially
formulated to cure anaerobically at room temperature.
Polymerization (cure) occurs as a result of the presence
of free ions and the inhibition of oxygen (O²). Cure
speed can be controlled through adjustments in process
Used to create leak proof parts, improving
machinability, in addition to increasing the durability and
surface quality. The hardened resins exhibit superior
chemical resistance and elevated temperature stability.
The microscopic voids, where potential leaks occur
(between metal grains or ceramic plastic molecules) in
the part are filled by the low viscosity resin during
vacuum application. Sealed micropores cure without
shrinkage to form tough cross-linked thermoset polymer,
permanently sealing the workpiece.
Anaerobic curing impregnation sealant
Seal porosity in metal castings and powder metal parts. Applied with a vacuum impregnation process that removes air from the pores and then fills the pores with liquid sealant.
When applied under the head of fasteners, Plastisol provides a positive seal that eliminates leaks. Cushions, insulates, reduces noise, and reduces vibration. Replaces O-Rings and Nylon Washers that are likely to Tear easily and are difficult to seat.
When applied under the head of fasteners Plastisol provides a positive seal that eliminates leaks.
- Cushions, insulates, reduces noise,
and reduces vibration.
- Replaces O-Rings and Nylon Washers
that are likely to Tear easily and are
difficult to seat.
Molykote® 321 Dry Film Lubricant is designed for use on parts that are inaccessible for lubrication after assembly; require a dry, thin lubricating film; or normally experience high initial wear on running-in new or rebuilt equipment.