Thread Locking

Thread Locking provides excellent resistance to vibration and loosening. The adhesive is activated during assembly and cures to form a tough polymer that locks and seals.

Loctite Dri-Loc

Dri-Loc is a dry-to-the-touch preapplied film for threaded fasteners. It remains inert on the fastener until assembly of the threads releases a quick curing resin. The resin fills all the voids in the threads and cures to securely lock and seal the assembly.

3M Fastener Adhesive

3M Fastener Adhesives are Microencapsulated, room temperature curing adhesives which enhance the anchorage of threaded fasteners. The adhesives remain dormant until the shearing action of engaging the fastener into a nut or threaded cavity breaks the capsules and allows the adhesives to cure.

Loctite Brass-Loc

Brass-loc is a low to medium strength thread locker AND sealant that will not corrode brass.

BRADLEY NYLON PATCH

Mechanical Nylon Patch or 360° is permanently bonded to the fastener threads and compresses upon engagement, causing a counterforce resulting in the torque value required.

Tectorius Tec-Bond

TECTORIUS™ 235 SERIES threadlocking products are room temperature curing, microencapsulated, adhesives that can be applied to male or female threaded fasteners of virtually all sizes, configurations, compositions and finishes.

BRADLEY EPOXY

Bradley Epoxies are microencapsulated adhesives. The adhesives remain dormant until the shearing action of the assembly activates the resin. Both the resin and the activator are encapsulated to speed up the locking cure time.

Thread Sealing

Thread Sealing Permanently seals tapered and parallel threads, providing an instant seal, but still allowing disassembly.

LOCTITE VIBRA-SEAL

Vibra-Seal is a pre-applied, water based sealant that when dried become a resilient, tight clinging, non-curing sealant for tapered or straight threads. The products provide excellent solvent and vibration resistance. Effective for use on sealing applications where re-adjustments are required.

3M THREAD SEALANT

Water based thread sealant with excellent resistance to automotive fluids.

Loctite Dri-Seal

Dri-Seal is a pre-applied, water based sealant that when dried become a resilient, tight clinging, non-curing sealant for tapered or straight threads. The products provide excellent solvent and vibration resistance. Effective for use on sealing applications where re-adjustments are required.

FEDERAL PROCESS EVERSEAL

Excellent water based sealant for sealing against air, hydraulic and most other fluids.

Casting Impregnation

Seal porosity in metal castings and powder metal parts. Applied with a vacuum impregnation process that removes air from the pores and then fills the pores with liquid sealant.

CHEMENCE ANASEAL

Anaerobic curing impregnation sealant

GODFREY & WING IMPREX

Anaerobic curing impregnation sealant

LOCTITE IMP Resinol

Anaerobic curing impregnation sealant

Other

Thread Lubrication, Thread Masking and Product Identification

BRADLEY PRODUCT IDENTIFICATION

Bradley can add an identification color to the head of your parts, helping to ensure they do not get mixed.

DOW CORNING MOLYKOTE

Dry film lubricant for components used intermittently or those exposed to unusual environments

LAKESIDE PLASTICS PLASTISOL

When applied under the head of fasteners Plastisol provides a positive seal that eliminates leaks. - Cushions, insulates, reduces noise, and reduces vibration. - Replaces O-Rings and Nylon Washers that are likely to Tear easily and are difficult to seat.

LOCTITE ANTI-SEIZE

Dry to the touch, anti-galling, thread lubricant

TECTORIUS TEC-FLON

Fluorocarbon coatings