Thread Locking
Thread Locking provides excellent resistance to vibration and loosening. The adhesive is activated during assembly and cures to form a tough polymer that locks and seals.
Loctite Dri-Loc
Dri-Loc is a dry-to-the-touch preapplied film for threaded fasteners. It remains inert on the fastener until assembly of the threads releases a quick curing resin. The resin fills all the voids in the threads and cures to securely lock and seal the assembly.
Dri-Loc 201 Yellow Data Sheet MSDS
Dri-Loc 200 Yellow Data Sheet MSDS
Dri-Loc 203 Silver Data Sheet MSDS
Dri-Loc 202 Green Data Sheet MSDS
Dri-Loc 204 Red Data Sheet MSDS
Dri-Loc 205 Peach Data Sheet MSDS
Dri-Loc 2045 Red Data Sheet MSDS
Dri-Loc STS Light Blue Data Sheet MSDS
Loctite Brass-Loc
Brass-loc is a low to medium strength thread locker AND sealant that will not corrode brass.
Brass-Loc 2020 Purple Data Sheet MSDS
Tectorius Tec-Bond
TECTORIUS™ 2353 and 2510 SERIES threadlocking products are room temperature curing, microencapsulated, adhesives that can be applied to male or female threaded fasteners of virtually all sizes, configurations, compositions and finishes.
Tec-Bond 2353 Data Sheet MSDS
3M Fastener Adhesive
3M Fastener Adhesives are Microencapsulated, room temperature curing adhesives which enhance the anchorage of threaded fasteners. The adhesives remain dormant until the shearing action of engaging the fastener into a nut or threaded cavity breaks the capsules and allows the adhesives to cure.
Fastener Adhesive 2353 Blue Data Sheet MSDS
Fastener Adhesive 2510 Orange Data Sheet MSDS
Fastener Adhesive 2353 Yellow Data Sheet MSDS
Fastener Adhesive 2510 Neutral Data Sheet MSDS
Fastener Adhesive tester Datasheet
Bradley Epoxy
Bradley Epoxies are microencapsulated adhesives. The adhesives remain dormant until the shearing action of the assembly activates the resin. Both the resin and the activator are encapsulated to speed up the locking cure time.
Epoxy Bradley 40 Lt. Blue Datasheet MSDS
Epoxy Bradley 50 Green Datasheet MSDS
Epoxy Bradley 60 Purple Datasheet MSDS
Bradley Nylon Patch
Mechanical Nylon Patch or 360° is permanently bonded to the fastener threads and compresses upon engagement, causing a counterforce resulting in the torque value required.
Nylon Patch White Nylon Datasheet MSDS
Nylon Patch 360° Coverage - Black Nylon Datasheet MSDS
Nylon Patch 360° Coverage - Yellow Nylon Data Sheet MSDS
Thread Sealing
Thread Sealing Permanently seal tapered and parallel threads, providing an instant seal, but still allowing disassembly.
Loctite Dri-Seal
Dri-Seal is a pre-applied, water based sealants that when dried become a resilient, tight clinging, non-curing sealant for tapered or straight threads. The products provide excellent solvent and vibration resistance. Effective for use on sealing applications where re-adjustments are required.
Dri-Seal 5030 Blue
Dri-Seal 513 White Data Sheet MSDS
Dri-Seal 513HV White Data Sheet MSDS
Loctite Vibra-Seal
Vibra-Seal is a pre-applied, water based sealants that when dried become a resilient, tight clinging, non-curing sealant for tapered or straight threads. The products provide excellent solvent and vibration resistance. Effective for use on sealing applications where re-adjustments are required.
Vibra-Seal 503 White Data Sheet MSDS
Vibra-Seal 503HV White Data Sheet MSDS
Vibra-Seal 516 Orange Data Sheet MSDS
Vibra-Seal 517 Orange Data Sheet MSDS
3M Thread Sealant
Water based thread sealant with excellent resistance to automotive fluids.
Thread Sealant 4291 White Data Sheet MSDS
Federal Process Everseal
Excellent water based sealant for sealing against air, hydraulic and most other fluids.
Everseal 183 Blue Datasheet MSDS
Everseal 483 White Datasheet
Casting Impregnation
Seal porosity in metal castings and powder metal parts. Applied with a vacuum impregnation process that removes air from the pores and then fills the pores with liquid sealant.
Chemence Anaseal
Anaerobic curing impregnation sealant
Anaseal Anaseal RT20 Data Sheet MSDS
Godfrey & Wing Imprex
Anaerobic curing impregnation sealant
Imprex 95-1000AC Datasheet MSDS
Other
Thead lubrication, Thread Masking and Activators
Lakeside Plastics Plastisol
When applied under the head of fasteners Plastisol provides a positive seal that eliminates leaks. - Cushions, insulates, reduces noise, and reduces vibration. - Replaces O-Rings and Nylon Washers that are likely to Tear easily and are difficult to seat.
Plastisol Black Datasheet MSDS
Loctite Anti-Seize
Dry to the touch, anti-galling, thread lubricant
Anti-Seize Anti-Seize Data Sheet MSDS
Loctite Activator
Catalyst for initiating chemical action in the Loctite Resins.
Activator P2 MSDS
Activator P3 (BPS) MSDS
Misc Cleaning / Oiling products
Misc products for pre-process cleaning and post-process oiling
Cleaning / Oiling products Products
Tectorius Tec-Flon
Fluorocarbon coatings
Tec-Flon Green/Cream Datasheet MSDS
Bradley Head Painting
Head painting for a wide variety of fasteners is available on-site.
Head Painting test Datasheet
Bradley Product Identification
Bradley can add an indentification color to the head of your parts, helping to ensure they do not get mixed.
Product Identification Painted Head or Tip
Dow Corning Molykote
Dry film lubricant for components used intermittently or those exposed to unusual environments
Molykote 321 Data Sheet MSDS