Loctite Dri-Loc 203 Silver
Low strength thread locker and sealant
Specifications
- Type:
- Chemical Locking - Water Based
- Strength:
- Low
- Maximum Temp:
- 300°F
- Cure Time:
- 72 Hours
- Color:
- Silver
- Vibration Resistant?
- Yes
- Reusable?
- No
The Bradley Group of Companies
- Call toll free: 1-800-201-7381
- Home
- Products
- Thread Locking
- Loctite Dri-Loc
- Dri-Loc 201 Yellow
- Dry to the touch. Remains inert on the fastener until assembly of the threads releases a quick curing resin.
- Dri-Loc 200 Yellow
- High Strength threadlocker and sealant. Suitable for phosphate and oil substrates only.
- Dri-Loc 203 Silver
- Low strength thread locker and sealant
- Dri-Loc 202 Green
- Medium strength threadlocker and sealant. When possible use Dri-Loc 2045 which is also a medium strength material.
- Dri-Loc 204 Red
- Designed for plated and stainless steel fasteners. High dried adhesion, high strength. NSF approved for Potable Water.
- Dri-Loc 205 Peach
- As of 4/13/2011, LOCTITE® has DISCONTINUED this product.
Fluorescent Peach Color, High strength. The lubricity characteristics of Dri-Loc 205 emulate an uncoated fastener or fitting to provide more predictable torque/tension performance during assembly. Meets GM6175M.
- As of 4/13/2011, LOCTITE® has DISCONTINUED this product.
- Dri-Loc 2045 Red
- Designed for plated and stainless steel fasteners. High dried adhesion, fast cure, high temperature (400F) meets GME51 & WX200. Use with loctite P2 and P3 caps.
- Dri-Loc STS Light Blue
- Sealing and medium strength threadlocking, fast cure. Meets GM6124M, GM14657A, Chrysler MScc 76-b.
- Dri-Loc is a dry-to-the-touch preapplied film for threaded fasteners. It remains inert on the fastener until assembly of the threads releases a quick curing resin. The resin fills all the voids in the threads and cures to securely lock and seal the assembly.
- Dri-Loc 201 Yellow
- Loctite Brass-Loc
- Brass-Loc 2020 Purple
- Locking and Sealing for Brass. During assembly of the fitting/fastener, a microencapsulated activator is released, intiating the curing process. The coating fills all the voids in the threads and cures to securely lock and seal the assembly.
- Brass-loc is a low to medium strength thread locker AND sealant that will not corrode brass.
- Brass-Loc 2020 Purple
- Tectorius Tec-Bond
- Tec-Bond 2353
- These series of products contain a microencapsulated, reactive element that is suspended in a quick curing, waterborne resin. The shearing forces caused by installation of the fastener to the mating part release the activator to allow curing of the resin matrix. The resulting chemical reaction rapidly bonds the surfaces, locking parts together and sealing leak paths. TECTORIUS TEC-BOND products offer consistent and predictable torque values and requires no heat or primers for curing. Unaffected By Automotive Fluids, Fast Fixture Times, High Temperature & TorqueSensitive Formulas
- TECTORIUS™ 2353 and 2510 SERIES threadlocking products are room temperature curing, microencapsulated, adhesives that can be applied to male or female threaded fasteners of virtually all sizes, configurations, compositions and finishes.
- Tec-Bond 2353
- 3M Fastener Adhesive
- Fastener Adhesive 2353 Blue
- Automotive Stuctural Adhesive - normal temperature formula (Up to 240F).
- Fastener Adhesive 2510 Orange
- Automotive Stuctural Adhesive - high temperature formula (Up to 300F).
- Fastener Adhesive 2353 Yellow
- Automotive Stuctural Adhesive - normal temperature formula (Up to 240F).
- Fastener Adhesive 2510 Neutral
- Automotive Stuctural Adhesive - high temperature formula (Up to 300F).
- 3M Fastener Adhesives are Microencapsulated, room temperature curing adhesives which enhance the anchorage of threaded fasteners. The adhesives remain dormant until the shearing action of engaging the fastener into a nut or threaded cavity breaks the capsules and allows the adhesives to cure.
- Fastener Adhesive 2353 Blue
- Bradley Epoxy
- Epoxy Bradley 40 Lt. Blue
- Bradley 40 is a water based chemical thread locker, low strength with no cure time.
- Epoxy Bradley 50 Green
- Dry to the touch, micro encapsulated pre-coating system with a acrylate base. Medium strength locking and sealing.
- Epoxy Bradley 60 Purple
- Dry to the touch, micro encapsulated pre-coating system with a acrylate base. High strength locking and sealing.
- Bradley Epoxies are microencapsulated adhesives. The adhesives remain dormant until the shearing action of the assembly activates the resin. Both the resin and the activator are encapsulated to speed up the locking cure time.
- Epoxy Bradley 40 Lt. Blue
- Bradley Nylon Patch
- Nylon Patch White Nylon
- Our White Nylon Patch is a Resilient, environmentally safe material formulated to upgrade any fastener to a re-usable, self-locking fastener that will automatically feed and requires no curing.
- Nylon Patch 360° Coverage - Black Nylon
- 360 Degree mechanical thread locking. Can be used on Nuts.
- Nylon Patch 360° Coverage - Yellow Nylon
- 360 Degree mechanical thread locking. Can be used on Nuts.
- Mechanical Nylon Patch or 360° is permanently bonded to the fastener threads and compresses upon engagement, causing a counterforce resulting in the torque value required.
- Nylon Patch White Nylon
- Thread Locking provides excellent resistance to vibration and loosening. The adhesive is activated during assembly and cures to form a tough polymer that locks and seals.
- Loctite Dri-Loc
- Thread Sealing
- Loctite Dri-Seal
- Dri-Seal 5030 Blue
- LOCTITE® has DISCONTINUED this product. As an alternative see: Everseal 183 Blue
LOCTITE® Product DRI-SEAL® 5030 is a high viscosity, nontoxic, thixotropic, preapplied, water-based thread sealant. When dried, it becomes a resilient, tight clinging, non-curing sealant for tapered threads. The product provides excellent solvent resistance. UL approved for Propane and Natural Gas.
- LOCTITE® has DISCONTINUED this product. As an alternative see: Everseal 183 Blue
- Dri-Seal 513 White
- Dri-Seal™ 513 (Low Viscosity) is a resilient, tight clinging, non-curing sealant for tapered or straight threads. This product can be used on metal or plastic fittings. NSF approved for Potable Water.
- Dri-Seal 513HV White
- Dri-Seal™ 513HV (High Viscosity) is a resilient, tight clinging, non-curing sealant for tapered or straight threads. This product can be used on metal or plastic fittings. NSF approved for Potable Water.
- Dri-Seal is a pre-applied, water based sealants that when dried become a resilient, tight clinging, non-curing sealant for tapered or straight threads. The products provide excellent solvent and vibration resistance. Effective for use on sealing applications where re-adjustments are required.
- Dri-Seal 5030 Blue
- Loctite Vibra-Seal
- Vibra-Seal 503 White
- Low viscosity sealant that will provide "constant on" torque. Also meets NSF approval.
- Vibra-Seal 503HV White
- High Viscosity sealant that will provide gap filling capability. Also meets NSF approval.
- Vibra-Seal 516 Orange
- High viscosity sealant, with "constant on" torque and resistance to vibrational loosening. Effective for use on sealing applications, particularly where readjustments are required.
- Vibra-Seal 517 Orange
- LOCTITE® Product Vibra-Seal 517 is a low viscosity, water-based thread sealant for tapered or straight threads. The product provides excellent solvent resistance and resistance to vibrational loosening. The products thread filling ability and prevailing torque characteristics are effective for use on sealing applications, particularly where readjustments are required.
- Vibra-Seal is a pre-applied, water based sealants that when dried become a resilient, tight clinging, non-curing sealant for tapered or straight threads. The products provide excellent solvent and vibration resistance. Effective for use on sealing applications where re-adjustments are required.
- Vibra-Seal 503 White
- 3M Thread Sealant
- Thread Sealant 4291 White
- Robost sealing performance. Excellent resistance to automotive fluids and can withstand high temperatures and pressures.
- Water based thread sealant with excellent resistance to automotive fluids.
- Thread Sealant 4291 White
- Federal Process Everseal
- Everseal 183 Blue
- UL approved sealant for Propane or Natural Gas. NSF approved for potable water use.
- Everseal 483 White
- Thread sealeant that maintains an effective seal even after re-insertion. Water based formula and a quick cure time.
- Excellent water based sealant for sealing against air, hydraulic and most other fluids.
- Everseal 183 Blue
- Thread Sealing Permanently seal tapered and parallel threads, providing an instant seal, but still allowing disassembly.
- Loctite Dri-Seal
- Casting Impregnation
- Godfrey & Wing Imprex
- Imprex 95-1000AC
- Used to create leak proof parts, improving machinability, in addition to increasing the durability and surface quality. The hardened resins exhibit superior chemical resistance and elevated temperature stability. The microscopic voids, where potential leaks occur (between metal grains or ceramic plastic molecules) in the part are filled by the low viscosity resin during vacuum application. Sealed micropores cure without shrinkage to form tough cross-linked thermoset polymer, permanently sealing the workpiece.
- Anaerobic curing impregnation sealant
- Imprex 95-1000AC
- Seal porosity in metal castings and powder metal parts. Applied with a vacuum impregnation process that removes air from the pores and then fills the pores with liquid sealant.
- Godfrey & Wing Imprex
- Other
- Loctite Anti-Seize
- Anti-Seize Anti-Seize
- Dry to the touch, anti-galling, thread lubricant. Instant sealing of most fluids and thread protection in corrosive environments.
- Dry to the touch, anti-galling, thread lubricant
- Anti-Seize Anti-Seize
- Loctite Activator
- Activator P2
- Small microcapsules, excellent for all size fasteners, especially fine threads. P2 is a catalyst for initiating chemical action in the loctite resins.
- Activator P3 (BPS)
- Large Microcapsules for M6 and larger. Works best with Loctite® 2045™, 201™, 204™ and STS™ Dri-Loc® products. NOT suggested for fine threads and small fasteners M6 or smaller.
- Catalyst for initiating chemical action in the Loctite Resins.
- Activator P2
- Misc Cleaning / Oiling products
- Cleaning / Oiling products Products
- Pre-Process Cleaning:
Mineral Spirits MSDS
Post-Process Oiling: Fuchs MSDS
- Pre-Process Cleaning:
Mineral Spirits MSDS
- Misc products for pre-process cleaning and post-process oiling
- Cleaning / Oiling products Products
- Tectorius Tec-Flon
- Tec-Flon Green/Cream
- Tectorius TEC-FLON™ is a bonded, heat resistant, protective coating specially formulated to prevent accumulation of undesirable substances onto substrate surfaces. Examples include: electrodeposited materials,welding by-products, solder, paint, powder coatings, overspray, dirt, and oil. In addition,TEC-FLON™ lubricates fastener threads to reduce driving friction, thread galling, and provide uniform clamp force.
- Fluorocarbon coatings
- Tec-Flon Green/Cream
- Bradley Product Identification
- Product Identification Painted Head or Tip
- Bradley can add an indentification color to the head or tip of your parts, helping to ensure they do not get mixed.
- Bradley can add an indentification color to the head of your parts, helping to ensure they do not get mixed.
- Product Identification Painted Head or Tip
- Dow Corning Molykote
- Molykote 321
- Molykote® 321 Dry Film Lubricant is designed for use on parts that are inaccessible for lubrication after assembly; require a dry, thin lubricating film; or normally experience high initial wear on running-in new or rebuilt equipment.
- Molykote 321
- Loctite Anti-Seize
- Thread Locking
- FAQ
- Buy Online
- Contact/Service Centers
