Dri-Loc is a dry-to-the-touch preapplied film for threaded fasteners. It remains inert on the fastener until assembly of the threads releases a quick curing resin. The resin fills all the voids in the threads and cures to securely lock and seal the assembly.
3M Fastener Adhesives are Microencapsulated, room temperature curing adhesives which enhance the anchorage of threaded fasteners. The adhesives remain dormant until the shearing action of engaging the fastener into a nut or threaded cavity breaks the capsules and allows the adhesives to cure.
Bradley Epoxies are microencapsulated adhesives. The adhesives remain dormant until the shearing action of the assembly activates the resin. Both the resin and the activator are encapsulated to speed up the locking cure time.
Mechanical Nylon Patch or 360° is permanently bonded to the fastener threads and compresses upon engagement, causing a counterforce resulting in the torque value required.
Thread Locking provides excellent resistance to vibration and loosening. The adhesive is activated during assembly and cures to form a tough polymer that locks and seals.
Dri-Seal is a pre-applied, water based sealants that when dried become a resilient, tight clinging, non-curing sealant for tapered or straight threads. The products provide excellent solvent and vibration resistance. Effective for use on sealing applications where re-adjustments are required.
Vibra-Seal is a pre-applied, water based sealants that when dried become a resilient, tight clinging, non-curing sealant for tapered or straight threads. The products provide excellent solvent and vibration resistance. Effective for use on sealing applications where re-adjustments are required.
Liquid sealant designed for sealing porosity in metal castings and powder
metal parts.
Seal porosity in metal castings and powder metal parts. Applied with a vacuum impregnation process that removes air from the pores and then fills the pores with liquid sealant.
