Bradley Group Coatings - Federal Process Everseal

Toll Free: 1-800-201-7381 or Email: coatingpros@bradleygroupcoatings.com

Loctite Dri-Loc
- Dri-Loc is a dry-to-the-touch preapplied film for threaded fasteners. It remains inert on the fastener until assembly of the threads releases a quick curing resin. The resin fills all the voids in the threads and cures to securely lock and seal the assembly.
Loctite Brass-Loc
- Brass-loc is a low to medium strength thread locker AND sealant that will not corrode brass.
3M Fastener Adhesive
- 3M Fastener Adhesives are Microencapsulated, room temperature curing adhesives which enhance the anchorage of threaded fasteners. The adhesives remain dormant until the shearing action of engaging the fastener into a nut or threaded cavity breaks the capsules and allows the adhesives to cure.
Bradley Epoxy
- Bradley Epoxies are microencapsulated adhesives. The adhesives remain dormant until the shearing action of the assembly activates the resin. Both the resin and the activator are encapsulated to speed up the locking cure time.
Bradley Nylon Patch
- Mechanical Nylon Patch or 360° is permanently bonded to the fastener threads and compresses upon engagement, causing a counterforce resulting in the torque value required.
Thread Locking provides excellent resistance to vibration and loosening. The adhesive is activated during assembly and cures to form a tough polymer that locks and seals.

Loctite Dri-Seal
- Dri-Seal is a pre-applied, water based sealants that when dried become a resilient, tight clinging, non-curing sealant for tapered or straight threads. The products provide excellent solvent and vibration resistance. Effective for use on sealing applications where re-adjustments are required.
Loctite Vibra-Seal
- Vibra-Seal is a pre-applied, water based sealants that when dried become a resilient, tight clinging, non-curing sealant for tapered or straight threads. The products provide excellent solvent and vibration resistance. Effective for use on sealing applications where re-adjustments are required.
3M Thread Sealant
- Water based thread sealant with excellent resistance to automotive fluids.
Federal Process Everseal
- Excellent water based sealant for sealing against air, hydraulic and most other fluids.
Thread Sealing Permanently seal tapered and parallel threads, providing an instant seal, but still allowing disassembly.

Chemence Anaseal
- Anaerobic curing impregnation sealant
Godfrey & Wing Imprex
- Anaerobic curing impregnation sealant
Loctite Resinol
- Liquid sealant designed for sealing porosity in metal castings and powder metal parts.
Seal porosity in metal castings and powder metal parts. Applied with a vacuum impregnation process that removes air from the pores and then fills the pores with liquid sealant.

Other

Loctite Anti-Seize
- Dry to the touch, anti-galling, thread lubricant
Loctite Activator
- Catalyst for initiating chemical action in the Loctite Resins.
Misc Cleaning / Oiling products
- Misc products for pre-process cleaning and post-process oiling
Dow Corning Molykote
- Dry film lubricant for components used intermittently or those exposed to unusual environments
Thead lubrication products and Activators

Thread Sealing - Federal Process Everseal

Excellent water based sealant for sealing against air, hydraulic and most other fluids.